Brandywine’s M212 Master Clock System represents the next generation of modular timing systems. Built as a commercial derivative of the highly successful ruggedized Modular Master Clock, the M212 provides assured timing capabilities using Brandywine’s Timewall™ technology.
Features:
- Modular design with multiple reference paths built in for high-availability.
- 6 expansion slots for customization and expansion.
- Industry-first GPS integrity checking with Timewall™
- Unique optical crosslink architecture for either Master-Slave hierarchical setups or Master-Master crosschecking and failover
- LCD display and keypad for basic status and configuration – secure web browser for detailed setup.
At the center of the M212 system is Brandywine’s powerful Master Clock Module (MCM). The MCM may be synchronized by a variety of reference sources and uses the selected reference to steer an embedded oscillator to provide stable and accurate time and frequency for the M212. Multiple references can be prioritized with automatic failover. Uniquely, the MCM’s Timewall™ algorithms validate the GPS reference based upon the inherent stability of the MCM oscillator, providing hardening against possible GPS spoofing.
Available input reference selections include GNSS (both commercial GNSS (GPS/GLONASS/IRNSS) and SAASM GPS receivers are supported), IRIG-B, and Have Quick/1PPS. In addition, an MCM may be synchronized to up to 2 other M212 chassis using a fiber optic crosslink, this provides additional resiliency for the M212 time and frequency references.
The base oscillator in the M212 is a high quality Temperature Compensated Crystal oscillator, but the M212 optionally can be ordered with other reference oscillator choices, including Rubidium, Chip Scale Atomic Clock (CSAC) and Ovenized Oscillator (OCXO).
The output signals for the M212 are generated by up to 6 Output Signal Modules (OSM), and are ideal for custom solutions or future expansion. Available modules include NTP, low-phase-noise frequency, time code modules such as IRIG A, B, G, H, and NASA 36, BCD, PPS, PPM, Have Quick, serial data (RS232/422) as well as optical crosslink.
The M212 status and control is via front panel display for basic configuration and status, a secure web browser, and via SNMPv3. Network protocols also fully support privacy and authentication.
Brandywine’s Modular Master Clock represents the next generation of modular timing systems. Built on the highly successful High Performance Timing System, the Modular Master Clock is a leap forward in design.
Features:
- Redundant design with multiple signal paths built in for high-availability.
- The modular design is highly adaptable and can be field-upgraded, allowing a future-proof solution
- 12 expansion slots in the 2U version and 6 expansion slots in the 1U variant.
- Ideal for applications that require an unusual mix of interfaces
- Unique optical crosslink architecture for either Master-Slave hierarchical setups or Master-Master crosschecking and failover
- 2U version is operated by an intuitive touch-screen interface, a first for any master clock system.
- All key components are hot-swappable and are dual redundant.
- The Output Signal modules are hot-swappable from the front, eliminating the need to disconnect cables.
- Secure Management interface through SNMPv3 and encrypted password access from the front panel
At the center of the system are Brandywine’s powerful dual-redundant Master Clock Modules (MCM), which are capable of receiving time from a GPS?/IRNSS signal, either from an internal SAASM or standard CA code receiver, or external reference sources, such as IRIG-B, 1PPS, 10 MHz or HaveQuick.
The output signals for the Modular Master Clock are generated by up to 12 hot-swappable Output Signal Modules (OSM), and are ideal for custom solutions or future expansion. Available modules include NTP module, Analog Low-Phase-Noise frequency module, IEEE-1588 PTP module, time code modules such as IRIG A, B, G, H, and NASA 36, Pulse Rates, PTTI, as well as an optical crosslink module.
Signal Reference Inputs
C/A code GPS Receiver (optional)
Receiver Type GPS L1 C/A, SBAS L1 C/A
GPS Reception 14 channels (GPS, SBAS)
Sensitivity Tracking: -159 dBm
Acquisition: -147 dBm
Accuracy 15ns (1σ) (@ -130 dBm)
TTFF Hot Start: <5 sec (@ -130 dBm)
Warm Start: 70 sec (@ -130 dBm)
Cold Start: 70 sec (@ -130 dBm
IRNSS Receiver (optional)
Receiver Type GNSS Multi-constellation
(GPS, GLONASS, NavIC (L5+S band)
Sensitivity Tracking: -153 dBm
Acquisition: -145 dBm
Accuracy 15ns (1σ)
SAASM GPS Receiver (optional)
Receiver Type GB-GRAM Type II
Keyfill cable DAGR compatible DB15
External 1PPS Input
Signal Format Per ICD-GPS-060B
Rate 1 pulse per second
Impedance 50 ohm
External GPS Have Quick T/C Input
Signal Format Per ICD-GPS-060A, STANAG 4246 HQ2A
Rate 1 frame per second
Impedance 1k ohm
Connector Type DB15M
External IRIG B Input
Signal Format IRIG B Per IRIG 200-04
Control Functions Per IEEE1344
Modulation ratio 2.5:1 to 3.3:1
Amplitude 1 Vp-p to 5Vp-p
Impedance >600 ohm
Connector Type DB15M
External 10MHz Reference Input
Frequency | 10 MHz ± 5E-11 |
Amplitude | 8 - 15 dBm |
Impedance | 50 Ω |
Connector Type | BNC |
Environmental
Power
2 power supply slots are available on both 1U and 2U chassis. 2U chassis can be either AC input, DC input or a combination. 1U is single or dual AC supply only.
AC Supply | ||
Voltage | 90-265 VAC 50/60 Hz. 100W Maximum |
|
Connector | IEC 320 C14 (standard) MS3102A-10SL-3P (optional MS shown) |
|
DC Supply | ||
Voltage | 18-36 VDC | |
Connector | Barrier Terminal Block |
Physical
Length (depth) | 20.00" |
Width | 17.00" |
Chassis Width | 19.00" |
Height | 3.47" (2U Chassis) 1.72" (1U Chassis) |
Weight | 25 lbs. nominal (slides not included) |
Temperature
Air Temperature | -15 to 55ºC |
Altitude Conditions | -1500 ft to +11,000 ft |
Airflow | 30 cfm front to side/rear. Side airflow is not obstructed by rack slides |
Shock and Vibration
Operating Shock | MIL-STD 810F 20g/11ms |
Bench Handling | MIL-STD-810F |
Vibration | MIL-STD-167-1 |
Structure-borne Noise | MIL-STD-740-2 |
EMC
FCC Part 15, Class A
IEC CISPR 22
CE
Available upon request.
The M210 is a Modular Timing System provides a Master Clock based upon a central microprocessor and a precision oscillator time base for many applications including synchronizing computers, telemetry systems, scientific experiments, communication networks or for the precise displaying of time of day. Offering a true COTS solution and with three slots and over thirty options, the M210 is truly a reliable and proven design to meet your timing needs.
Modular Network Time Server with GPS or Irig Input & Expansion Slots
The M210 Modular Time Systems offer versatile solutions to many timing applications. this product line features two basic chassis with option slots.
The M210 chassis hosts up to three of the 80 available option modules while maintaining a compact 1U, rack mount form factor.
To see the list of options available for the M210, go to the M210 & M211 Options page.
Performance Specification at 20°C
Time Accuracy: Standard crystal oscillator maintains free‑run
accuracy of 20 milliseconds over 4 hours at 20°C.
Display: 2 row by 24 character LCD. Character height
5mm.
Keyboard: 5 button keyboard for equipment configuration
and control. Storage of equipment configuration in non-volatile
memory.
Power: 90-260V AC ± 10% 50‑60Hz Load 40W (typical)- subject to
options and oscillator fitted. Connection via 3 pin IEC plug.
Mechanical: 19 inch rack mounting 1U high 305mm deep. The chassis has
provision for up to 3 option modules to be fitted within the unit.
Environment (Operation and Storage)
Temperature: 0°C to +40°C
Humidity: Up to 95% RH (non-condensing)
EMC: CE Compliant
![]() |
Data Sheet | |||
There are 80 modular options for the M210 and M211. Below is our options datasheet and if you would like more details on specific modules, please look at our Modular Options page. |
||||
![]() |
Data Sheet |
|
User Manuals | |
![]() |
User Manual |
![]() |
User Manual |
![]() |
User Manual |
![]() |
User Manual |
![]() |
User Manual |
![]() |
User Manual |
linux18d-9.zip | Firmware Update 18d-9 for 210LA 3-Port NTP Module for M210 and M211 |
The M210 and M211 Modular Time Systems offer versatile solutions to many timing applications. this product line features two basic chassis with option slots.
The M210 chassis hosts up to three of the 80 available option modules while maintaining a compact 1U, rack mount form factor.
The M211 is the larger version of the M210. This M211 chassis will host up to nine option modules offering the system designer unmatched flexibility while maintaining a true COTS solution.
Below is a list of the options and datasheets available for the M210 & M211. Please contact your sales manager for more details on each module.
No. | Description | Type | ||||
1 | LF Receiver Module | Input | ||||
2 | DC Chassis Operation | Power | ||||
4 | Precision Oscillator | Clock | ||||
5 | Active LF Antenna | Antenna | ||||
7 | Timecode Generator Module | Input or Output | ||||
8 | Combined Timecode/Serial Output Module | Output | ||||
9 | Parallel Interface Module | Output | ||||
10 | Standard Frequency Output Module | Output | ||||
11 | Relay Module | Output | ||||
15 | GPS Receiver Module* | Input | ||||
16 | LF simulator Module | Output | ||||
17 | Octal Serial Module* | Output | ||||
18 | Analogue Driver Module* | Output | ||||
21 | Active GPS Antenna (26dB gain) | Antenna | ||||
22 | Disciplined Oscillator Module | Clock | ||||
23 | EBU Timecode Module | Output | ||||
24 | Audio Output Module | Output | ||||
25 | Video Insertion Module | Output | ||||
26 | AC Measurement Module | Output | ||||
27 | NTP Time Server Module | Output | ||||
27A | NTP Time Server Module (100 BaseT) | Output | ||||
27B | NTP Time Server Module (Three Port 100BaseT) | |||||
28 | Passive GPS Antenna | Antenna | ||||
29 | Passive LF Antenna | Antenna | ||||
32 | Octal Serial Module with Precision Time Input | Input /Output | ||||
34 | SDH (E1/T1) Interface Module | Output | ||||
35 | Active High-gain GPS Antenna (40dB gain) | Antenna | ||||
36 | Real Time Clock Module | Clock | ||||
38 | Have Quick Interface Module | Input or Output | ||||
39 | BITE Interface Module | Output | ||||
40 | ATM Interface Module | Output | ||||
46 | M211 AC/DC Power Supply Unit | Power | ||||
47 | Extender card | Misc | ||||
48 | Programmable Digital Synthesizer | Output | ||||
49 | Programmable Sinewave Synthesiser | Output | ||||
50 | LF Lightning Protector | Misc | ||||
51 | GPS Lightning Protector (Passive) | Misc | ||||
52 | GPS Lightning Protector (Active) | Misc | ||||
53 | High Performance GPS Antenna (35dB) | Antenna | ||||
55 | Intelligent Octal Serial Module | Output | ||||
56 | Intelligent Serial Timecode Module | Output | ||||
57 | Multiple Frequency Output Module | Output | ||||
58 | Intelligent Timecode Module | Output | ||||
59 | Enhanced BITE Interface Module | Output | ||||
60 | 3 Core Signal Interface Module | Input or Output | ||||
61 | Octal Serial Generator Module | Output | ||||
62 | Serial Clock Driver Module (provided as 4 modules) | Output | ||||
63 | Octal Serial Module (RS485/Galvanic Isolation) | Input or Output | ||||
64 | +24V Impulse Driver (Galvanic Isolation) | Output | ||||
65 | Octal Analogue Driver Module | Output | ||||
66 | Combined Timecode/Serial/Analogue/Relay Module* | Output | ||||
67 | Fibre Optic CCS Transceiver Module | Input or Output | ||||
68 | Intelligent Audio Module (for M842) | Output | ||||
69 | Universal GPS Receiver Module | Input | ||||
70 | GPS Head-end Antenna/Receiver (in conj w/ opt 71) | Input | ||||
71 | GPS Decoder Module (in conj w/ opt 70) | Input | ||||
72 | 5-channel Intelligent Timecode Generator Module | Output | ||||
73 | Intelligent Timecode Reader/Generator Module | Input or Output | ||||
74 | 5 x Fibre Optic Module | Output | ||||
80 | PTP [IEEE1588] Grandmaster Clock Module | Output |
The Brandywine Communications M211 High Capacity Modular Timing System where a large number of reliable time/frequency outputs are required. With nine option-module slots and over thirty standard options the M211 offers your Master Clock solution for multiple applications including synchronizing computers, telemetry systems, scientific experiments, communication networks or for the precise displaying of time of day. The M211 offers the user a true COTS solution to most time and frequency problems.
Modular Network Time Server with GPS or IRIG Input & Expansion Slots
The M211 is the larger version of the M210. This M211 chassis will host up to nine option modules offering the system designer unmatched flexibility while maintaining a true COTS solution.
To see a list of options for the M211, please go to the M210 & M211 Options page.
Performance Specification at 20°C
Time Accuracy: Standard crystal oscillator maintains free‑run accuracy of
20 milliseconds over 4 hours at 20°C.
Display: 2 row by 24 character LCD. Character height 5mm.
Configuration: 5-segment button for equipment configuration and control.
Storage of equipment configuration in non-volatile memory.
Power: 90-260V AC ± 10% 50-60Hz Load 40W (typical)- subject to
options and oscillator fitted. Connection via 3 pin IEC plug.
Mechanical: 19 inch rack mounting 3U high 360mm deep. The chassis has
provision for up to 9 option modules to be fitted within the unit.
Environment (Operation and Storage)
Temperature: 0°C to +40°C
Humidity: Up to 95% RH (non-condensing)
EMC: CE Compliant
![]() |
Data Sheet | ||
|
Data Sheet |
User Manuals | ||
![]() |
User Manual | |
![]() |
User Manual | |
![]() |
User Manual | |
![]() |
User Manual | |
![]() |
User Manual | |
![]() |
User Manual |
linux18d-9.zip |
Firmware Update 18d-9 for 210LA 3-Port NTP Module for M210 and M211 |